This electrode is suitable for cutting all types of metals, including alloyed and unalloyed steels, non-ferrous metals, cast iron, and cast steels. It can be used for metal cutting and piercing holes.
It is recommended to use a light reciprocating movement to remove the molten metal from the kerf. When cutting horizontal pieces, hold the electrode at a 45-degree angle in the cutting direction, and for vertical pieces, an angle of 60 degrees downward is recommended. If the electrode is moist, it should be dried at 70 degrees Celsius for 30 minutes.
© 2024 Stanvac International Ltd. All Rights Reserved.
